ARDEX WA EPOXY

Product Description

PLEASE CHECK STOCK ! Some colors may  not be available


Color References : Please Always refer to actual grout chart for exact colors !

Shipping time :  Estimated 4 - 8 Business days depending on location ! 

ARDEX WA™

ARDEX WATM
High Performance, 100% Solids Epoxy
Grout and Adhesive
A solvent-free, two-component epoxy grout and adhesive
that is very easy to apply and clean. Particularly suited for
tile installations in swimming pools, hot tubs, showers, food
processing facilities, industrial areas, hospitals and any
installation requiring high standards of hygiene and
chemical resistance.
• Grout joints up to 1/2” (12 mm)
• Use for setting all types of tile and stone
• Submerged applications (swimming pools, hot tubs,
showers) in just 7 days
Meets or exceeds ANSI 118.3 • ISO Classification: ISO 13007 RG
ISO Classification: 13007 R2T


  • So easy to apply and clean, you won’t believe it’s an epoxy!

    ARDEX WA™ High-performance, 100% Solids Epoxy Grout and Adhesive is a solvent-free, two-component epoxy grout and adhesive. ARDEX WA is suited particularly for tile installations in industrial areas, swimming pools, hot tubs, showers, bathrooms, dairies, meat packing facilities, breweries, hospitals and any installation requiring high standards of hygiene and chemical resistance. Tile installed with ARDEX WA can be grouted in 12 hours.

    Key Features

    • Grout joints up to 1/2” (12 mm) wide
    • Use for setting all types of tile
    • Use where maximum chemical resistance and/or hygiene and cleanliness are required
    • Use for applications in food processing, industrial, institutional and commercial facilities
    • Ideal for swimming pools, hot tubs and other wet areas, can be submerged after only 7 days
    • Very easy to clean with only water
    • Use for interior and exterior floors and walls
    • Waterproof and frost resistant
    • Solvent free, low VOC’s
    • Available in 36 colors – see ARDEX Grout Color Chart in the “Downloads” tab

    Standards

    SystemOne™
    Meets or exceeds ANSI 118.3
    ISO Classification: ISO 13007 RG
    ISO Classification: 13007 R2T

    TECHNICAL DATA ARDEX WA™

    Installation

    Mixing Ratio: Mix all of “B” into “A;” smaller batches can be measured carefully by using 3 parts by weight of “A” to 1 part by weight of “B.”

    Coverage (When used as a setting adhesive):

    1/4″ x 1/4″ x 1/4″ sq. Notch trowel
    For tiles larger than 4 sq. in. (25 cm2)
    19.5 sq. ft. / 8.8 lbs. tub (1.8 m2 / 4 kg)

    3/16” x 5/32” V-Notch trowel
    For tiles 4 sq. in. (25 sq. cm) or less
    32 sq. ft. / 8.8 lbs. tub (3 sq. m / 4 kg)

    Coverage (When used as a grout): See Technical Data for complete details

    Pot Life: Approx. 40 minutes
    Working Time: Approx. 1 hour
    Open Time: Approx. 1 hour

    Performance

    Time to Grout: 12 hours
    Open to Traffic: Light foot traffic: 12 hours
    Full traffic loads: 2 days
    Limited chemical resistance and submerged applications: 7 days; see Cure Time (After Grouting) section above for details
    VOC: 2.67 g/L per ASTM D2369
    Packaging: Approx. 8.8 lbs. (4 kg) net weight per tub
    Storage: Store in a cool, dry area. Do not leave package exposed to sun.
    Shelf Life: 1 year, if unopened.
    Warranty: ARDEX L.P. Standard Limited Warranty applies

Material
Color
Brilliant White 35
Polar White 01
Natural Bone 36
Antique Ivory 04
Fresh Lily 02
Natural Almond 09
Irish Creme 10
Desert Sand 37
Vintage Linen 08
Sahara Drift 38
Stone Beach 13
Caraway 39
Mocha Latte 40
Apple Butter 46
Kodiak Brown 46
Coffee Bean 16
Ground Cocoa 16
Gray Dusk 15
Dark Walnut 48
Molasses 49
Baked Terra Cotta 32
Misty Blue 50
Glacier Ice 41
Azure Blue 27
Dove Gray 18
Smoke 42
Battleship 43
Silver Shimmer 19
Raw Steel 44
Stormy Mist 25
Slate Grey 21
Gunmetal 45
Cast Iron 22
Charcoal Dust 23
Black Licorice 24
$0.00 $105.00