PLEASE CHECK STOCK ! Some colors may  not be available

Color References : Please Always refer to actual grout chart for exact colors !

Shipping time :  Estimated 4 - 8 Business days depending on location ! 

ARDEX WA™

ARDEX WATM
High Performance, 100% Solids Epoxy
Grout and Adhesive
A solvent-free, two-component epoxy grout and adhesive
that is very easy to apply and clean. Particularly suited for
tile installations in swimming pools, hot tubs, showers, food
processing facilities, industrial areas, hospitals and any
installation requiring high standards of hygiene and
chemical resistance.
• Grout joints up to 1/2” (12 mm)
• Use for setting all types of tile and stone
• Submerged applications (swimming pools, hot tubs,
showers) in just 7 days
Meets or exceeds ANSI 118.3 • ISO Classification: ISO 13007 RG
ISO Classification: 13007 R2T

• 
  

• So easy to apply and clean, you won’t believe it’s an epoxy!

  ARDEX WA™ High-performance, 100% Solids Epoxy Grout and Adhesive is a solvent-free, two-component epoxy grout and adhesive. ARDEX WA is suited particularly for tile installations in industrial areas, swimming pools, hot tubs, showers, bathrooms, dairies, meat packing facilities, breweries, hospitals and any installation requiring high standards of hygiene and chemical resistance. Tile installed with ARDEX WA can be grouted in 12 hours.

  Key Features

  • Grout joints up to 1/2” (12 mm) wide
  • Use for setting all types of tile
  • Use where maximum chemical resistance and/or hygiene and cleanliness are required
  • Use for applications in food processing, industrial, institutional and commercial facilities
  • Ideal for swimming pools, hot tubs and other wet areas, can be submerged after only 7 days
  • Very easy to clean with only water
  • Use for interior and exterior floors and walls
  • Waterproof and frost resistant
  • Solvent free, low VOC’s
  • Available in 36 colors – see ARDEX Grout Color Chart in the “Downloads” tab

  Standards

  SystemOne™
  Meets or exceeds ANSI 118.3
  ISO Classification: ISO 13007 RG
  ISO Classification: 13007 R2T

  TECHNICAL DATA ARDEX WA™

  Installation

  Mixing Ratio: Mix all of “B” into “A;” smaller batches can be measured carefully by using 3 parts by weight of “A” to 1 part by weight of “B.”

  Coverage (When used as a setting adhesive):

  1/4″ x 1/4″ x 1/4″ sq. Notch trowel
  For tiles larger than 4 sq. in. (25 cm²)
  19.5 sq. ft. / 8.8 lbs. tub (1.8 m² / 4 kg)

  3/16” x 5/32” V-Notch trowel
  For tiles 4 sq. in. (25 sq. cm) or less
  32 sq. ft. / 8.8 lbs. tub (3 sq. m / 4 kg)

  Coverage (When used as a grout): See Technical Data for complete details

  Pot Life: Approx. 40 minutes
  Working Time: Approx. 1 hour
  Open Time: Approx. 1 hour

  Performance

  Time to Grout: 12 hours
  Open to Traffic: Light foot traffic: 12 hours
  Full traffic loads: 2 days
  Limited chemical resistance and submerged applications: 7 days; see Cure Time (After Grouting) section above for details
  VOC: 2.67 g/L per ASTM D2369
  Packaging: Approx. 8.8 lbs. (4 kg) net weight per tub
  Storage: Store in a cool, dry area. Do not leave package exposed to sun.
  Shelf Life: 1 year, if unopened.
  Warranty: ARDEX L.P. Standard Limited Warranty applies